LINACT-N2
Micro Linear Actuator | Compact
The LINACT-N2 micro linear actuator from Linact.co.za sets a new standard for small spaces. This pen-sized actuator is incredibly light. It’s built for jobs where space is very tight.
The LINACT-N2 only uses 12VDC power. Even though it’s light-duty, it moves things reliably. It’s perfect for small industrial tasks. Choose it for mini automation projects. It also fits special equipment needing simple, controlled motion.
You can get it with 30mm, 50mm, or 100mm stroke lengths. This actuator gives dependable power for tight spaces and small designs.
Detailed Specifications of the LINACT-N2 Micro Linear Actuator
Here you’ll find a comprehensive overview of the LINACT-N2’s general technical data, followed by specific performance characteristics across its available variants.
General Technical Specifications
This section details the foundational characteristics and capabilities of the LINACT-N2 micro linear actuator.
| Specification | Detail |
|---|---|
| Motor Type | DC Permanent Magnet Motor |
| Inner Tube Material | Aluminum Alloy |
| Standard Voltage | 12VDC |
| Available Strokes | 30mm, 50mm, 100mm |
| Speeds at No-Load (Range) | 5mm/s up to 150mm/s |
| Max Dynamic Load | Up to 188N (19Kg) |
| Max Static Force | Up to 235N (23Kg) |
| Feedback | None |
| IP Rating | IP54 |
| Noise | Less than 55dB |
| Duty Cycle | 10% with full load |
| Operational Temperature | -25℃～+60℃ |
| Protection | Built-in Limit Switches |
| Certification | CE Certified |
| Lifetime Expectancy | 20,000 cycles |
| Warranty | 12-Month Limited Warranty |
LINACT-N2 Performance Variants
This table allows you to select the precise LINACT-N2 variant that matches your application’s specific force and speed requirements.
| Code | Max Load (Dynamic) |
Max Load (Static) |
No Load Speed | Max Current |
|---|---|---|---|---|
| A | 188N (19Kg) | 235N (23Kg) | 5mm/s | 1.5A |
| B | 96N (9.6Kg) | 120N (12Kg) | 9.5mm/s | 1.4A |
| C | 32N (3.2Kg) | 40N (4Kg) | 30mm/s | 1.5A |
| D | 6.4N (0.64Kg) | 8N (0.8Kg) | 150mm/s | 1.5A |
Fully Extended & Fully Retracted Lengths
Easily select the right micro linear actuator for your design using our clear stroke, retracted, and extended length specifications.
Key Features & Benefits
The LINACT-N2 is built for tiny spaces. It brings big advantages to your light-duty, compact projects. See what makes it a must-have part:
- Ultra-Compact, Pen-Sized Design: This actuator is incredibly small, like a pen. It fits easily into the tightest spaces. This allows automation in tiny devices, complex machines, and compact setups where larger actuators won’t go.
- Dedicated 12VDC Operation: Made only for 12VDC power. This means it’s super easy to connect. It simplifies power needs for common low-voltage systems.
- Fixed Stroke Lengths (30mm, 50mm, 100mm): Get consistent and reliable movement for set distances. This makes your design simpler. It ensures the actuator works the same way every time for jobs needing exact motion.
- Lightweight, Efficient Build: Made with light materials. The LINACT-N2 is perfect for portable devices, robot arms, or any project where low weight is key.
- Built-in Limit Switches: These stop the actuator automatically at the end of its travel. This prevents damage from going too far. It ensures safe, steady use without needing extra controls.
- Aluminum Alloy Inner Tube: This tube helps keep the actuator light. It also makes it strong and stiff inside for smooth, straight movement.
- Low Noise Operation: Works quietly, producing less than 55dB. Ideal for noise-sensitive applications and environments.
- Simple Two-Wire Setup: Easy to wire with just two cables. Change polarity to reverse direction. Simplifies installation.
- Dust and Splash Resistant (IP54): Protected against dust and water splashes. This makes it suitable for a wider range of indoor and outdoor applications.
Typical Applications
The LINACT-N2 is tiny but powerful enough for light tasks. It creates new ways to automate things. It’s perfect for:
- Micro-Robotics & Small Automation: Great for moving tiny grippers or adjusting sensors on small robots. It also works well in very small assembly lines for controlled motion.
- Consumer Electronics & Smart Devices: Fits neatly into smart home gadgets and automated toy parts. It’s also good for compact cameras or hidden screen adjustments.
- Laboratory & Medical Gear (Small Scale): Use it for exact, gentle movements in diagnostic tools and micro-pipette systems. It also controls fluids where space and soft action are key.
- Specialized Industrial Controls (Light Duty): Good for small part positioning. It can activate small switches or move very light materials in tight spots within special factory machines.
- Home & Office Automation: Provides quiet, compact movement. Use it for small vents, automated cabinet locks, or subtle window blind adjustments.
Mounting Brackets
Mounting brackets are essential for your LINACT-N2 micro linear actuator. They help you install it securely and easily. Find all our brackets on the accessories page. For the LINACT-N2, we recommend the LINACT-BR07 bracket to ensure a stable setup for your projects.
Download Data Sheet
Get all the details. Find full specs, sizes, and performance charts. Download the official LINACT-N2 data sheet here:
Intellectual Property Notice: All technical specifications and documents remain the exclusive property of Linear Actuators South Africa (Pty) Ltd. These files may not be reproduced or shared without written consent, in accordance with Clause 16 of our Standard Terms & Conditions.
Video Demonstration
Video Demonstration: Micro Linear Actuator in Action
See the LINACT-N2 in action! This video shows our micro linear actuator opening and closing. Watch how it performs, and get a closer look at its small size and efficient operation.